Language

+86-18367801950
Service
Home / Service

  • Injection Molded Part

    Injection molded parts are various plastic products used in washing machines, and these parts are usually produced through the injection molding process.

    Function: Protect the internal mechanical structure and provide an attractive external surface.
    Material: Usually ABS or PC/ABS alloy, these materials have good impact and heat resistance.
    Characteristics: High gloss and good paintability are required, and sometimes UV inhibitors are added to prevent discoloration and aging caused by prolonged exposure to sunlight.

  • Accessory Assembly

    Assembling the parts of a washing machine into a complete product in a certain order and in a certain way.

    Assemble the front panel, top cover, side panels and other parts of the washing machine in place. Use screws or snap fasteners to ensure that the housing is solid and the seams are even. Connect the control panel to the front panel, making sure the wiring is properly mated. Secure the control panel and check that the buttons, knobs and display are working properly. Place the laundry basket into the drum and make sure the basket can spin freely. Install bearings and seals to ensure that the basket spins smoothly and without leaks.

  • Wiring Assembly

    Washing machine wiring assembly is an important part of the washing machine assembly process, involving the operation of the motor, the operation of the control system, and safety performance.

    The motor wires usually have two or three wires, including phase (fire), zero and ground. Connect the motor wires to the appropriate terminals on the control board of the washer. Pay attention to wire colors and markings to ensure that the phase, zero and ground wires are properly connected. Connect the wiring from the control panel to the washer's control board, including buttons, knobs, and displays. Use wire clips or ties to secure the control wires to avoid loose cables. Sensor and switch wiring. Connect the wiring of sensors such as water level sensor, temperature sensor, etc. to the control board. Connect the wiring of door switches, power switches, etc. to the control board. Connect the metal casing of the washer to ground, usually with a special grounding screw or terminal block. Make sure the ground connection is reliable to minimize the risk of electrical leakage.

  • Wrap

    Packaging is to ensure that the product is not damaged during transportation and storage.

    Put foam pads or bubble wrap on the places where the washing machine is easy to scratch (e.g. door edges, corners) to prevent collision during transportation. Use shockproof cotton to wrap the washing machine, especially focusing on the protection of vulnerable parts such as the control panel and glass windows. Put desiccant inside the washing machine to prevent rust or mold in a humid environment. Choose a slightly larger cardboard box according to the size of the washing machine and make sure there is enough space around the washing machine to place cushioning material. Place the washing machine smoothly into the carton box, leaving enough space around and on top to fill the cushioning material. Fill the cushioning material between the washing machine and the carton with foam blocks, bubble wrap, etc., to ensure that the washing machine will not move inside the carton. Seal the carton with sealing tape to ensure firmness.

  • professional consultation

    Shipment

    Washing machines require special attention during transportation to avoid damage during handling.

    Load the washing machine smoothly onto the transportation vehicle using a forklift or other handling tool. Place the washing machine inside the vehicle to ensure that it is stable and will not slide or tip over during transportation. If there are multiple loads, ensure that the washing machine is not crushed by other loads. Use tools such as straps and securing buckles to secure the washing machine to the vehicle to prevent movement during transportation. Choose the most suitable transportation route according to the road condition and weather condition. During transportation, maintain a stable speed, avoid sharp braking and sharp turns, and reduce vibration. In case of bad weather, take necessary protective measures, such as covering rainproof cloth. Step 3: Unloading.

  • After-Sales

    Ensure you have a great experience while using.

    Instruct consumers on the proper installation of the washing machine, including plumbing connections and power access. After installation, conduct test runs to ensure that the washing machine works properly. Instruct or assist consumers in the cleaning and maintenance of washing machines. Provide telephone counseling services to answer consumers' questions in the process of using the machine. Provide online customer service through official website, APP or social media platforms.